Anyone replace theirs? I have one that is shot - up in front, thankfully. Was wondering if anyone knew the cost, or if they had sourced an alternate supplier like McMaster-Carr.
Dave,
Is this what it looks like? If so it is a Lord mount and I will look for the part number. I found some for around $35 each out of Maryland. Last pics are of old, failed one so I replaced all.
That's the one - and in my case, that one under the fuel filter is the one that failed on mine... If you find a PN, please post!
http://www.aircraftspruce.com/catalog/eppages/lordsq.php (http://www.aircraftspruce.com/catalog/eppages/lordsq.php)
It wouldn't happen to be this one, would it? Darned cheap, if so...
Dave,
It is not that one as it is only 2 3/8 square. Check the square dimension. It should be 3 1/4". The correct part number is 283P-155. It is called a "Heavy Duty Plateform mount" by Lord.
Here is the web site,
http://rpmmech.thomasnet.com/item/plateform-mounts/heavy-duty-plateform-mounts-square-/pn-1801? (http://rpmmech.thomasnet.com/item/plateform-mounts/heavy-duty-plateform-mounts-square-/pn-1801?)
For approx $26.00 each + shipping which was reasonable as I recall, in late 2008 I bought 4 from;
Mid Atlantic Rubber
Baltimore, MD
1-800-536-1620
1-410-644-1620