Title: Generator auto start
Post by: George Stoltz on November 17, 2010, 10:54:09 pm
Post by: George Stoltz on November 17, 2010, 10:54:09 pm
At what point of battery discharge does the generator automatically start?
Title: Re: Generator auto start
Post by: Barry Beam on November 17, 2010, 11:02:20 pm
Post by: Barry Beam on November 17, 2010, 11:02:20 pm
At what point of battery discharge does the generator automatically start?
I am not sure on the 2000 model.
Motorcader - August 1999
http://beamalarm.com/Documents/generator-auto-start.htm (http://beamalarm.com/Documents/generator-auto-start.htm)
Title: Re: Generator auto start
Post by: Felix and Gail on November 18, 2010, 12:03:33 am
Post by: Felix and Gail on November 18, 2010, 12:03:33 am
Mine comes on at 12.1 v, but I believe they are programmable.
Title: Re: Generator auto start
Post by: George Stoltz on November 18, 2010, 03:29:19 am
Post by: George Stoltz on November 18, 2010, 03:29:19 am
Felix,
Ding, ding, ding. I will read my Xantrex manual. that's where the info is located. Thank you for the reply.
Ding, ding, ding. I will read my Xantrex manual. that's where the info is located. Thank you for the reply.
Title: Re: Generator auto start
Post by: Dave M (RIP) on November 18, 2010, 06:42:39 am
Post by: Dave M (RIP) on November 18, 2010, 06:42:39 am
George,
AS you say Ding, Ding Ding, Dong.
If you look under the file section, you will find the manual for the BCM-12, I sent it in few weeks ago.
And yes they are adjustable for voltage and time.
This calibration is not for every one with a meter, it is not a real simple task.
One note of caution, If you screw it u p, the factory is no longer making them, so beware.
Have fun, but make sure you have a good DVM, I used the Fluke 87, cuz it works.
The link below might get you there, not sure
AS you say Ding, Ding Ding, Dong.
If you look under the file section, you will find the manual for the BCM-12, I sent it in few weeks ago.
And yes they are adjustable for voltage and time.
This calibration is not for every one with a meter, it is not a real simple task.
One note of caution, If you screw it u p, the factory is no longer making them, so beware.
Have fun, but make sure you have a good DVM, I used the Fluke 87, cuz it works.
The link below might get you there, not sure