Print Page - Ignition Switch

Title: Ignition Switch
Post by: Rick Zika on January 10, 2011, 11:18:53 am

Morning All
My question is,what tool or gadget will tighten the chrome ring that holds the ignition switch. I installed a new switch last year and it keeps working loose. Thanks

Title: Ignition Switch
Post by: Peter & Beth on January 10, 2011, 11:33:15 am

I use a cable tie to keep the ignition switch from "rolling". When it starts to move again, I just replace it with a new cable tie.

Title: Re: Ignition Switch
Post by: Rick Zika on January 10, 2011, 11:59:00 am

Thanks Peter

Title: Re: Ignition Switch
Post by: Jon Twork on January 12, 2011, 12:02:19 am

Check with a Chevrolet dealer or else at a knowledgeable parts house and get the special tool that the mechanics use for installation.
Regards,

Title: Re: Ignition Switch
Post by: Rick Zika on February 16, 2011, 10:56:33 pm

Thanks Jon, Tonite we are Oklahoma city,
1. degrees home tomorrow.

Title: Re: Ignition Switch
Post by: Jim Frerichs on March 06, 2011, 09:54:35 pm

Hi Rick,

When I tightened my ignition switch, I simply held the chromed front ring with a screwdriver blade in one of the slots (just enough to stabilize it) and turned the switch from the rear to tighten it. It takes a bit of trial and error to end up with the key slot vertical. It hasn't turned since.

Jim
2002 U320

Title: Re: Ignition Switch
Post by: Jon Twork on March 06, 2011, 10:42:08 pm

You may be able to get a Chevrolet Ignition switch spanner wrench from an auto parts store or maybe even rent it.

Regards,
JON TWORK KB8RSA

Foretravel Owners' Forum

Foretravel Motorhome Forums => Foretravel Tech Talk => Topic started by: Rick Zika on January 10, 2011, 11:18:53 am