I have just finished a few changes the last 3 days and thought you may be interested to see them. Both TVs I took out and replaced, and in the back of the bedroom cabinet that housed the old Panasonic I made into a small storage space for my file folder on Foretravel and my camera equipment will reside there. I also did the "Add another inverter" as per Barry's Modification idea section. Additional Inverter (http://www.beamalarm.com/Documents/additional_inverter.htm) I started collecting the bits a few weeks ago but finally put it together under the bed and I also added a battery disconnect switch on the selector panel so I do not have to lift bed to turn new smaller inverter on/off to use. This disconnect switch is rated at 130amps continuous so plenty good enough.The picture #4482 is the in line 100amp fuse for inverter. I just have to clean the tvs up and do a bit of touch up staining around the front one, but I am very pleased with it all. Now to get some more solar panels on the roof now that the sat dish and ant have gone. Oh, by the way I made up my own brackets/hangers for the back of tv's, so that saved a few hundred $ too.
Great job! I especially like the extra storage!