Trying to find the plastic strips at the top and bottom of the door, this is the brass tone shower.
Thanks Bill W.
Hi Bill,
Did you get any feed back on the door sweep? May be someone knows who manufactured the shower stalls? I need the sweep for our 97 U320. I've found bunch on the internet, but not the correct size.
I would call parts at MOT and see if they can help you with a part number at least.
No reply's and I have not been able to find the Mfg.I will keep looking, the next project is in the planing stage, new sofa upholstery, and bamboo flooring.
Our 2003 has the angled (not curved) corner shower. Our installation instructions are dated 1997.
794 Series Stikstall (yes, that's how it's spelled) Shower Enclosure.
Alumax Bath Enclosures, a product of Alcoa. PO Box 40, Magnolia, AR 71754-0040 (870) 234-4260
We don't have a flexible sweep strip at the top, just at the bottom of the door.
At the top is part "R", snap in fillers (2)
At the bottom of the door, the sweep "assembly":
Part S - drip rail (1)
Part T - drip plugs (2)
Part U - Tapered drip vinyl (1)
Michelle
Thanks Michelle!!!!! I will give them a call tomorrow.
I just Googled http://www.alumaxshowerdoor.com/shower-bathroom-enclosures.html#anchor8 (http://www.alumaxshowerdoor.com/shower-bathroom-enclosures.html#anchor8) and got the contact info Contacts at Alumax - Shower Doors, Bathroom Enclosures, Shower Enclosures (http://www.alumaxshowerdoor.com/index.php/contacts/)
they don't sell parts directly, but do have a dealer locator
Alumax Bath Enclosures Dealer Locator (http://hosted.where2getit.com/alumax/)
Hope they're the same manufacturer
-M
Did you get in touch with FT by any chance? I'll can them if you did not.