When I plugged in to the power post my Progressive Ind. surge protector indicated no errors but the Power Line Monitor showed 79 volts on both legs. 30 Amp post. The outlet it plugs into showed 117. Is there any way to adjust the monitor voltage indicator. The leds indicating polarity went out a long time ago. Does anybody have a replacement for this. It is handy to make sure the generator came on line correctly. Thanks
Howdy Art, The following topic/string may contain some answers for you:
Power Line Monitor Is On The Fritz (http://www.foreforums.com/index.php?topic=9866.0)
Good Luck, Dave Abel
Kudos for the info and the link. Karma going your way Thanks