Title: need screw in fitting for windshield washer - FOUND IT
Post by: Larry Rubin on April 09, 2012, 03:02:18 pm
Post by: Larry Rubin on April 09, 2012, 03:02:18 pm
On my '04 U295, a part of the windshield washer fitting has broken and I'd like to replace it rather than have to open up the dash to install the complete fitting.
The part I need is a small metal connector that has screw threads on one side and hose barb on the other. It fits into the exterior plastic part then onto the hose on the other end. No luck at auto stores - but haven't called FOT yet.
Anyone got one in their parts box or know the manufacturer?
Found it!
Thanks for the help Barry, but I found the connector on .: TAC :. Transportation Accessories Company - Specialists in School Bus Parts (http://www.tacbusparts.com/index.asp)
with the help of a post on windshield wiper nuts by Gary Boulard
TH6500-1510 — Thomas Washer Elbow (Plastic)
90 Degree Thomas thru cowl plastic washer tubing connector w/nut.
The part I need is a small metal connector that has screw threads on one side and hose barb on the other. It fits into the exterior plastic part then onto the hose on the other end. No luck at auto stores - but haven't called FOT yet.
Anyone got one in their parts box or know the manufacturer?
Found it!
Thanks for the help Barry, but I found the connector on .: TAC :. Transportation Accessories Company - Specialists in School Bus Parts (http://www.tacbusparts.com/index.asp)
with the help of a post on windshield wiper nuts by Gary Boulard
TH6500-1510 — Thomas Washer Elbow (Plastic)
90 Degree Thomas thru cowl plastic washer tubing connector w/nut.
Title: Re: need screw in fitting for windshield washer
Post by: Barry Beam on April 09, 2012, 03:40:20 pm
Post by: Barry Beam on April 09, 2012, 03:40:20 pm
'On my '04 U295, a part of the windshield washer fitting has broken and I'd like to replace it rather than have to open up the dash to install the complete fitting.
The part I need is a small metal connector that has screw threads on one side and hose barb on the other. It fits into the exterior plastic part then onto the hose on the other end. No luck at auto stores - but haven't called FOT yet.
Anyone got one in their parts box or know the manufacturer?
Denso - Windshield Washer Nozzle / Wet arm adapter Measures - 2" x 1-1/8" Denso #LA146305-0450
Windshield Wiper Replacements (http://www.beamalarm.com/Documents/windshield_wiper_replacements.html)
Bottom of page.
Title: Re: need screw in fitting for windshield washer - FOUND IT
Post by: Bill Willett on April 09, 2012, 04:01:45 pm
Post by: Bill Willett on April 09, 2012, 04:01:45 pm
Go to a good model airplane shop and ask for a Dubro 8/32 pressure fitting.