Print Page - How do I Interface sea level system with my audit monitor

Title: How do I Interface sea level system with my audit monitor
Post by: Roland Begin on July 01, 2013, 05:23:05 pm

I am trying to determine how to interface the sea level system with my audit 1160 computer.
Anyone out there can help me?

Roland

Title: Re: How do I Interface sea level system with my audit monitor
Post by: Jim McNeece on July 01, 2013, 07:53:30 pm

I just installed a SeeLevel system a few weeks ago (Success - SeeLevel 709 Tank Monitoring System Installed (http://www.foreforums.com/index.php?topic=18119.msg123148#msg123148)).

The SeeLevel system is entirely different from the old Javelina stuff. I see no way to interface the two; however, I could be wrong. You should call the folks at SeeLevel.

I threw out my Javelina stuff. You can plug the old LP gauge into the SeeLevel system, but you cannot use the Javelina compass or thermometers.

Jim

Title: Re: How do I Interface sea level system with my audit monitor
Post by: Kent Speers on July 01, 2013, 07:58:30 pm

I agree with Jim. Totally different system but the See Level works great.

Title: Re: How do I Interface sea level system with my audit monitor
Post by: Roland Begin on July 02, 2013, 10:53:09 am

Thanks, Installed the see level system and put the monitor by the stove top. Would have preferred marrying with the Javelin....oh well. Thanks again.

Roland

Foretravel Owners' Forum

Foretravel Motorhome Forums => Foretravel Tech Talk => Topic started by: Roland Begin on July 01, 2013, 05:23:05 pm