Anyone know the location of the level sensor on a 2003 U320. Mine may need some tweaking. Have found locations for older models but not for 03.
Bill
Ours is located in the electronics bay, on the right side, front, top of the bay as you are looking in. Its inside of aluminum stack of HWH controls.
There is a Nut/screw combination visible on the side of the HWH stack, you can use this to adjust the level (use the hwh instructions on how to do this. The nut turns the board and the screw in the nut lifts/lowers the board.
Jim McNeece just had HWH change out this nut/screw/mounting for a new and more robust design, the original, while it works OK, is not really as robust / easy to tune as it should be.
I've attached a few pictures to help.
Thanks Steve,
I have read the adjustment procedure in my owners info and on Barry's web site but did not find instruction for what I was seeing. Thanks for the photos...very helpful.
Bill