I was looking at the silverleaf and noticed a series of three no ECU connections fault 2. I know this is a dumb question but I had me starter batteries inadvertently go down to 6 volts would this automatically set these codes? I used the boost switch and was eventually able to start motorhome. Thanks Elliot
I had my engine shut down when my condenser fan had a short in it. It would short when I turned on the ac and the engine would stop because the volts at the battery were drawn below 10. The ECM shut off. I do not know the code it would throw but I bet that with the ECM shut down it would probably say no ECM COnnection. I did not have silver leaf then so I can not tell you the code it threw.