Does anyone know what the Gates/Dayco/Goodyear/NAPA belt number is for a 1999 Power Tech 10K (Isuzu engine) generator is. I can't seem to find any cross reference for the FT or Power Tech belt #.
Check With Barry's site " Beamalarm.com ", he may have posted part numbers.
power-tech-idl-8000-8kw-belts-filters-hoses-for-foretravel (http://beamalarm.com/Documents/belts-filters-hoses/power-tech-idl-8000-8kw-1999.html)
Gary B
I've been looking myself and actually bought a belt or two that turned out to not work. I don't think there is a cross reference for it from my research.
The Isuzu belt is very short in height and very narrow compared to a normal v-belt and a conventional v-belt does not seat correctly in the pulleys. Really wanted to use the Gates Green Stripe belt I bought which was the correct length but clearly doesn't fit correctly in the pulleys, off to Ebay it goes.
Bruce,
Here is the Isuzu dealer directory. Try calling one?
http://www.isuzuengines.com/pdf/DealerDirectory.pdf (http://www.isuzuengines.com/pdf/DealerDirectory.pdf)
Keith
Robert, We just changed belt and hoses on our Powertech Isuzu 8,000 watt genset:
Removed v-belt NAPA Premium XL 25-7320, wanted a little longer belt so bought NAPA XL 25-7325 $9.68.
New curved radiator hoses 1-1/4" ID, both need to be cut to size: Top hose NAPA 8247 $8.85.
Bottom hose NAPA 8150 $13.29.
Belleville hose clamps, NAPA 705-1504 $4.60 each.
Constant-Torque | 410 SS (http://www.hoseclampkings.com/cat-48-1-40/constant_torque_58_band_410_ss_screw.htm)
Thanks for that info, Barry. I'll have to try out that belt.
I had the hoses and the radiator changed out at a Powertech shop in Denver right after buying my FT since the radiator was leaking like a sieve on the drive home across the midwest. 100 hours later the radiator was leaking like a sieve again, only this time I built a separate mounting bracket for it.
I've got the valve adjustment to do this weekend and hopefully I will be done playing around with the genset for awhile.
To second Barry, I replaced the belt on my 8kw Powertech. The belt that was on it was a Gate 7325. It fit nicely and the adjuster sat halfway in travel.
Thanks for the confirmation that our choice for a longer Isuzu fan belt was already on your generator.