Title: Fault lights on Prosine remote panel
Post by: Fiddler on September 30, 2014, 06:15:23 pm
Post by: Fiddler on September 30, 2014, 06:15:23 pm
Coach in storage w/electric. Left for 12 days, when returned the pole gfsi switch was tripped; the panel was blinking red fault lites. Check the batteries; 3 chassis batts at 12.3 each; 2 house at 11.7. Tried resetting the power source and each time, the panel tried to display the usual lites but tripped the gfsi plug and died with the red lites blinking. Am in the process of recharging the batteries separately and plan to try again. Looking forward to comments.
I'm suspecting the Prosine invertor may have developed a problem due to low battery voltage; anybody know what are the most common causes for the prosine to fault/fail?
I'm suspecting the Prosine invertor may have developed a problem due to low battery voltage; anybody know what are the most common causes for the prosine to fault/fail?
Title: Re: Fault lights on Prosine remote panel
Post by: Fiddler on September 30, 2014, 06:17:37 pm
Post by: Fiddler on September 30, 2014, 06:17:37 pm
Oh by the way, when I arrived, the HWH pump in the bay was running continuously for quite a while and while I was seeing what I could do to shut it off, it stopped on its own.
Coach in storage w/electric. Left for 12 days, when returned the pole gfsi switch was tripped; the panel was blinking red fault lites. Check the batteries; 3 chassis batts at 12.3 each; 2 house at 11.7. Tried resetting the power source and each time, the panel tried to display the usual lites but tripped the gfsi plug and died with the red lites blinking. Am in the process of recharging the batteries separately and plan to try again. Looking forward to comments.
I'm suspecting the Prosine invertor may have developed a problem due to low battery voltage; anybody know what are the most common causes for the prosine to fault/fail?
Title: Re: Fault lights on Prosine remote panel
Post by: Tim Fiedler on September 30, 2014, 06:34:37 pm
Post by: Tim Fiedler on September 30, 2014, 06:34:37 pm
Fiddler - I would start by resetting the pro sine via the procedure in the manual (i Forgot what it is, but fixed a similar problem for me) If you can't find reset procedure on-line or in manual, call Mike Rodgers at MOT, he is the one that got me fixed up.
Tim
Tim
Title: Re: Fault lights on Prosine remote panel
Post by: Michelle on September 30, 2014, 06:52:15 pm
Post by: Michelle on September 30, 2014, 06:52:15 pm
Coach in storage w/electric. Left for 12 days, when returned the pole gfsi switch was tripped; the panel was blinking red fault lites. Check the batteries; 3 chassis batts at 12.3 each; 2 house at 11.7. Tried resetting the power source and each time, the panel tried to display the usual lites but tripped the gfsi plug and died with the red lites blinking.
What do the fault lights/error codes indicate? Go to Appendix C in the manual and follow the instructions to get the error codes
If it's a Prosine 2.5 here is the manual
Title: Re: Fault lights on Prosine remote panel
Post by: Fiddler on September 30, 2014, 10:46:38 pm
Post by: Fiddler on September 30, 2014, 10:46:38 pm
Thx for the prompt replies; what a great group of people on this forum. I will match the code to the appendix and proceed from there; and will also feed back to the group the results.
Title: Re: Fault lights on Prosine remote panel
Post by: Caflashbob on October 01, 2014, 12:11:14 am
Post by: Caflashbob on October 01, 2014, 12:11:14 am
Thx for the prompt replies; what a great group of people on this forum. I will match the code to the appendix and proceed from there; and will also feed back to the group the results.
After 30 years around Foretravel the one constant is that we are in this together.
I used to be the guru. Now we have multiple ones. Much better.