Title: Manual water fill valve
Post by: bbeane on March 12, 2015, 01:18:19 pm
Post by: bbeane on March 12, 2015, 01:18:19 pm
Anyone ever replaced the manual water fill ball valve(under the bathroom sink) on a U295, the fresh water tank wants to keep filling itself? I haven't looked at it yet, just wonder what you have to junk to get to it.
Title: Re: Manual water fill valve
Post by: Bill Willett on March 12, 2015, 04:17:37 pm
Post by: Bill Willett on March 12, 2015, 04:17:37 pm
Bruce, the floor in the bath cabinet has to come out ,lots of screws vale is easy after that, parts I used to repair mine 1 shark bite 1/2
inch connector, 1 shark bite ball valve, 1shark bite 90 degree elbow and a short piece of 1/2 inch pex.
inch connector, 1 shark bite ball valve, 1shark bite 90 degree elbow and a short piece of 1/2 inch pex.
Title: Re: Manual water fill valve
Post by: bbeane on March 13, 2015, 07:02:14 am
Post by: bbeane on March 13, 2015, 07:02:14 am
Thanks for the info Bill. I'll get into it this weekend.
Title: Re: Manual water fill valve
Post by: Bill Willett on March 13, 2015, 09:24:02 am
Post by: Bill Willett on March 13, 2015, 09:24:02 am
Bruce, if I was computer literate, and could get the photos out of my albums, I would post them, they are under fill valve in the album.
Title: Re: Manual water fill valve
Post by: steve on March 13, 2015, 06:40:29 pm
Post by: steve on March 13, 2015, 06:40:29 pm
this one?
Title: Re: Manual water fill valve
Post by: Bill Willett on March 13, 2015, 09:22:41 pm
Post by: Bill Willett on March 13, 2015, 09:22:41 pm
Thanks Steve. ^.^d