I am new to the Forum but have owned a 2000 U270 since 2002; absolutely love it!!!! The Hella fog light covers are deteriorating and I cannot find replacements: they are white and approximately 7 13/16" long X 3 7/8" high X 9/16" deep. Does anyone know of a source for these covers?
Many thanks!!!
Not only are the Hella covers not available, neither are the Hella lights themselves available. We find it not necessary to cover them.
Google hella fog light covers all kinds come up.
We have found the bulbs on ebay but not the lenses. We've siliconed a stone hole in one for moisture and just try to keep them as clear as possible.
Hella Stone Shield Covers 138127001 - Free Shipping on Orders Over at... (http://www.summitracing.com/parts/hla-138127001?seid=srese1&gclid=CjwKEAjwu72pBRC9hsn2-e34vRUSJACnSYsTgMjMdNHnW9QgKxZdUt1qrRhNMtCthoD9cLmXJS4fRRoCm-vw_wcB)
2 Hella 550 H87037001 Stone Brush Covers Guards Fog Lights Driving Lamps... (http://www.ebay.com/itm/2-HELLA-550-H87037001-STONE-BRUSH-COVERS-GUARDS-FOG-LIGHTS-DRIVING-LAMPS-JEEP-/331190747287)
Amazon.com: HELLA Clear Stone Shield for 550 Series Lamp: Automotive (http://www.amazon.com/HELLA-Clear-Stone-Shield-Series/dp/B000H0KN9G/ref=pd_sim_auto_1?ie=UTF8&refRID=1QDTRR4MWYQJR5TBBJVH)
These pertain to Hella 550's which are 4.69 inch high x 7.69 inch wide, inconsistent with what Bobcat shows. The black bezels around mine are about the dims. Bobcat states.
Stump may have found that Hella lights &/or covers are available. I may be wrong when I said not available.
Google Hella Fog Lamps and choose 'Images" (on the top line) shows pictures that may fit. I am not sure our original Hella model numbers, so what looks good may not fit.
Many thanks for input re Hella fog light covers for my 2000 U-270. Past and current searches via Factory, Google and E-Bay turned up no exact replacements, however I just have obtained the Hella 550 cover that is readily available via Google sites. It appears this cover will work with slight modification, primarily by removing two tabs on the bottom. I'll let you know more once I actually remove those tabs. Again, many thanks!!!
even more like Unubtanium is any kind of a protective cover for the glass lenses of the 90mm projectors Xtreme installs. don't want anything over them when on, just during the day. thinking maybe I'll find some Tupperware or Ziploc the right size.
Here you go, I am the find it man! What else do you need? Maybe I could start a business doing this,it sure would beat trucking!
Headlamp Headlight Protection, LampGard by WeatherTech | WeatherTech.com (http://www.weathertech.com/lampgard/)
Thanks, Stump. I had seen those, but had not contacted the company to see if they can do covers for the small round projectors. Generally, they do covers for large composite lamps.
have been keeping my eyes open for something that could serve as daytime protection for the glass lenses of my new Xt installed headlamps.
Today at a MEIJER store I spotted some "Splash Fun Treads". like the ones in the link, although the package I bought are owls -- somewhat larger and more round than the other patterns.
http://www.kitchenstuffplus.com/Series/4817-FUN-TREADS.aspx?offset=1
They have little suction cups of the back of silicone or vinyl patterns. I cut down the edges to fit the larger of my new round lamps. cutting the outer edges off the turtle or starfish might work better for the smaller (90mm) lamps. look kind of cute. have no idea how well they will stay in place going down the road.
... drag and drop photos did not work for me.