Can someone point me to thread which lists the plumbing pieces needed to replace the Haldex Pure Power Plus air drier?
I think all you need is the remanufactured dryer (got ours from NAPA), a couple of electrical butt splices and the correct pipe dope. You reuse the air line fittings from the old dryer.
Rich
Rich,
No, I meant the pieces to bypass the drier if I'm unsuccessful finding one today.
It's on Beam Alarm. Don't know how to post the link.
Rich
This looks like what Rich referenced:
Foretravel Motorhome technical help and information links (http://www.beamalarm.com/foretravel-links/foretravel-technical-help.html#Air_Dryer)
Hope it helps
Air Dryer Bypass Demo (http://www.foreforums.com/index.php?topic=22007.msg165726#msg165726)
Scroll down toward the bottom of the first page.
Howdy Brett, Maybe this will help?
Part Number Collection (http://www.foreforums.com/index.php?topic=11472.msg195269#msg195269)
Good Luck, Dave A
Hopefully I can make you at least feel a little better. You can actually drive without your drier until you finally get the one you want. I did that until I found a brand new one on Ebay. Just connect the 2 big hoses together and cap off the 1/4" line coming from the governor and relax. Drain off any water from the wet tank daily and replace the drier at your convenience.
I got the parts from FOT, probably too expensive there, before i knew of a kit or such....i have been forewarned however. You need a proper big wrench as it takes a goodly effort to disconnect, connect so check your tool kit or find a mechanic if need help to install.
Mike
To connect my big hoses together you would need an 8" section of pipe, then unions to the end fittings.
This is what I used. Make sure it's for steel pipe and not high pressure or hydraulic. The bevel is different.
Here is some more on the subject with parts list further down.
Air Dryer Bypass Demo (http://www.foreforums.com/index.php?topic=22007.0)
Keith