Trying to limit the number of visits I must make to the under side of my coach front side for headlight adjustment. My coach appears to have either Xtreme or some other company's conversion which uses the Hella lowbeam and high beam fixtures plus a led multibulb running/signal. My question is what the headlight adjustment screw/hex might be. I am guessing somewhere from 6-9 mm. I also need to replace one of the led signal fixtures due to water penetration causing less than half of the leds to not light.
Unable to escape the WI winter this season and will be chomping at the bit come early April.
Thanks in advance for responses
Bob
Hi Bob,
I have attached instruction from Xtreme on headlight adjustment and bulb replacement.
Hope this helps, Jim
and the answer is 7mm. Thanks
Now does anyone have a reference for replacement running/signal led lights used in this conversion project?