Print Page - D2 Governor PSI

Title: D2 Governor PSI
Post by: ltg on March 25, 2016, 12:12:41 pm

There are plenty of posts in the Forum archives about the cut in and cut out pressures on the D2 Governor. Does anyone know what the cut in and cut out pressures were set at when the coaches are delivered from Foretravel when new? Thanks. Larry

Title: Re: D2 Governor PSI
Post by: Michelle on March 25, 2016, 12:28:16 pm

Quote from: ltg – March 25, 2016, 12:12:41 pm

There are plenty of posts in the Forum archives about the cut in and cut out pressures on the D2 Governor. Does anyone know what the cut in and cut out pressures were set at when the coaches are delivered from Foretravel when new?

Owner's manual on a 2003 says 90-120 (ours is section/page 4-4, instrument panel air gauges). I would suspect your 2004 to be the same.

Title: Re: D2 Governor PSI
Post by: ltg on March 25, 2016, 01:16:22 pm

Thanks Michelle. I never thought to look in the owners manual. The D2 Governor I just purchased from FOT has a cut-in pressure of 105 +5/-0 PSI. The D2 governor installed by a mobile mechanic in West Texas last week has a cut-In of 100 PSI and a Cut-out of 120 PSI.
Larry

Foretravel Owners' Forum

Foretravel Motorhome Forums => Foretravel Tech Talk => Topic started by: ltg on March 25, 2016, 12:12:41 pm