Working on compartment doors, I have the vertical style side compartment door s and there are 2 types of upper latches on doors which one is correct and can I get more of them, here are some pictures.
I believe pic A to be the correct one, although pic B may be a replacement version...Mine have the ones in Pic A...Just took off the door for hail damage repair...Will be putting it back on tomorrow.
I also believe the first picture to be correct. Got an assortment of replacement parts from FOT about 2 years ago.
Art, ours has the ones in your first pic also. If push comes to shove, you can always use a bolt of the same size for thet shaft. Just double nut it so it won't come off.
I also have the studs shown in your first picture.
The stud shown in the second picture looks like it has a substantially larger diameter and I wonder if someone install it to compensate for a worn latch on the door that mates with the stud or found a completely different replacement latch set from some other bus components.
Thanks' Guys
I have replaced some of my door pivot or lock bolts, and when I could find them, use shoulder bolts. When I could not find ones like I took off that were broken, I went with non shoulder, and drilled out the mounting holes.
Art,
We had the same situation with our '95. Foretravel Parts came through after some initial confusion and shipping wrong part. I returned the part with my photo and got a refund, a phone call AND two complimentary, correct striker studs sent by FT Parts. Pretty pleased with the outcome!
Good luck! P