Arrived camp ground this afternoon and went on 50amp shore power and Xantrex panel did not light up. Tank monitor screen showed house batteries were at 13.4 volts and about 6 hours later it is indicating 13.8. I'm assuming the charger is working. In the morning when I unplug I'm going to see if the inverter is working but since I never leave the inverter on (battery charger is always left on, I do not turn it off when on shore or generator) not sure when I press the inverter key pad it will work if the panel is inoperative. Any suggestion on trouble shooting the problem would be appreciated.
Unplug and replug both ends (inverter and remote). That will insure a good connection and will also reset if that is all that is needed.
Inverter is working and it appears the charger also. Thank you Brett for the suggestion, I'll give that a try. From what I remember reading the forum there is an individual who repairs the panel if I am not able to reset.