Installed new gas shocks on gen door.The door will not "latch" or hold in the up position.There are 2 short springs,one on each
side where the hinge pivots.One spring is not connected seems like it is stretched a little too long.Do these springs have
something to do with holding the door up?
Not sure what type gas shocks you have, but while I'm researching replacing ours, this works: Good old American ingenuity! ^.^d
Probably not relevant since we have a different model, but mine, I believe, has an actual latch that locks the door in the open position.
Front gen door is like the rear engine door, in that it does not have a stay-up latch. What air pressure was in the new struts, could it be too low?
100 lbs.,will be at driving school mon.,will ask Foretravel about them.
Don't know about your year but my '99 "cams over to lock on the generator and the engine hatch.
As does my '03
The new air springs that I put on our 97 U270 were 135 lbs.