Have a norcold 682,went to crankup before trip,will not work on elec or gas,have power to circuit board (120 volt),have the 12 volt power,have gas to gas valve,igniter working but no gas,gas valve does not seem to be opening.looking for ideas.
Leaving for NAC in morning,supposed to have tech classes for the hubbys while the girls drive,will try and get a class on
refrigerator troubleshooting.
ps,the little bulbs on the upper board not lit.
Have you checked the fuses on board at back of fridge (remove plastic cover to view)? If they are good have a Dinasour Board sent to you at FT and replace it there.
Usually that fix's it.
JohnH
John is on the right track. Take the cover off of the board and clean the ends of the fuses and the spring contacts before you spend money. I had the same problem after storage and that cleared it.
Speedbird 1.
Took board off and cleaned connections with pencil eraser,put back and it worked,another forum fix.
This may sound silly, but this happened to me once. The issue was that the coach wasn't level.
Glad you got it fixed.
cheers