Shop Just called today says I need new rotor and Pads for right rear. Called Foretravel $$$$$$$ any other options?
Thanks Craig
Do you have a part number?
If this is your part number MERITOR ROTOR 3218K167 (http://www.ebay.com/itm/MERITOR-ROTOR-3218K167-/161752706534)
Pads if this is your part number
KIT15625PM by MERITOR - DISC PAD KIT (http://www.finditparts.com/products/39522/arvin-meritor-kit15625pm)
Stump,
That should be the correct # for the rear on his '97 U 295. It should also fit the ' 97 U 320.
Pads should be KIT 15625 PM,
As always it is best to pull the # off your axle and double check.
Pamela & Mike
Thanks Trying to find some where that has parts in stock not much to choose from in central Illinois.
I doubt you will find them in stock in your area that are affordable. Is the numbers posted above correct? Maybe they can expedite ship?
That is also the # for my 2000 rear rotor and will fit any model from build 3336 onwards.
JohnH
here is the rotor on ebay sold by "fleetparts" Good price too.
MERITOR ROTOR 3218K167 | eBay (http://www.ebay.com/itm/MERITOR-ROTOR-3218K167-/161752706534?hash=item25a9366de6:g:rlwAAOSwKsRWFkOJ&vxp=mtr)
We bought our helper springs from:
Meritor Parts Online | ArvinMeritor Parts | FinditParts (http://www.finditparts.com/t/575/manufacturer/meritor/?srcid=CHL01SCL004-Nall-Dmdt-Gusa-Svbr-Mbrd-Kmeritor_brake-Uvngdx&gclid=CjwKEAiA7ejCBRDlp8uF6ezPnjoSJAAPED7MZE9y_st0ksMUFqPhSNz60EAwiCodtk7Iec2R1UsTORoCsEbw_wcB)
Thank You everyone for the replys, I will call FT in the am and see about expedited shipping.
Might save yourself a few bucks if you order online and see about expedited shipping. jmo
Check out a place that sells truck parts or a truck dealer.
Carter-
Nac
We have also found FindItParts to generally have best price and shipping.
They have it cheaper and free shipping if ordered online
FinditParts (http://www.finditparts.com/search?utf8=%E2%9C%93&s=3218k167&commit=)
You can buy the rotor and pads through NAPA.
IIRC the price for the rear rotor was about $250 from NAPA but I can't recall the price of the brake shoes.
Went to Fleet Pride today and picked up 2 rotors 2 sets of pads,2 sets of slide pins 2 inner hub seals, I hope all the parts are correct wont know until Monday when shop opens. Total for everything was around $1300.00. These are for the rear.
That sounds about right as far as cost.
speaking of brake part numbers.....anyone have the Meritor part numbers for our coach, Front rotors and pads.
Thx
Hans
Hans,
Just had our brakes done at MOT. The part number for the pads was KIT15625PM (contains 4 pads, does two brakes). The same part number as listed in posts above for newer models. Shop around for cheapest price.
Don't know the front rotor number - did not need to replace ours.
New slide pins are in KIT15017 (2 pins, does one brake)
WARNING! I got brake rotors from FindItParts that were not machined correctly. (http://www.foreforums.com/index.php?action=dlattach;topic=29444.0;attach=45951)
The new rotor in the picture is from FindIt, note the missing machined inset at the top of both rotors. Cost me $200 to have the machining done after we received the rotors. It was the correct Meritor number, just not correctly completed before sent to FindIt.
My two cents.....
What is that inset machined for? What goes in it?
There may be a matching boss on the wheel that fit in the inset trues/aligns the wheel when installed. Should be a good snug fit.
John
IF your rotor is 3218T1008, it needs the lip. I believe Meritor shipped an incomplete batch to FindItParts. They had 8 left when I bought mine, and confirmed all 8 did not have the machining.
Have to ask the question,will meritor cover the $200?
When you need to order rotors, check the wide section of the ventilated rotor for your part number, it is stamped there.
It never hurts to ask. I believe they should or send you a proper part. Should be implied manufacturing warranty.
John
The back rotors were both replaced in October. The part numbers were correct, I think it was a bad run.