Foretravel Owners' Forum

Foretravel Motorhome Forums => Foretravel Discussions => Topic started by: wantabe on February 07, 2017, 05:06:01 pm

Title: restoring a 1986 grand villa 33
Post by: wantabe on February 07, 2017, 05:06:01 pm
I need some suggestions please. I've got water stained paneling and I need to know what will dissolve the interior finish to touch it up and refinish. I don't want to sand it. Also, I've got a converter that hums bad enough to rattle your teeth. Can I replace it with an electronic battery charger with the only sound coming from a cooling fan ?  The converter seems to be hung from threaded rods under the floor with limited access through the waste dump basement hatch. Is there some way to get to it ?  Is there a problem running the genset while plugged into shore power? I've seen yes and no? Will it damage anything? Thanks for your help



































Title: Re: restoring a 1986 grand villa 33
Post by: nitehawk on February 07, 2017, 05:29:59 pm
I suggest you contact James Holder, the service manager at Tennessee RV. James has a 1984 Foretravel, but most likely is conversant with your model and year coach. He probably even has manuals.
I know he has been extremely helpful with my questions re our coach.
Oh, they used to be a Foretravel dealer.

His email address is jholder@tennesseerv.com
Title: Re: restoring a 1986 grand villa 33
Post by: Chuck & Jeannie on February 07, 2017, 06:22:36 pm
Is there a problem running the genset while plugged into shore power?
If, repeat IF, your coach has a automatic transfer switch that selects between shore power and generator, and IF that ATS is working properly, then theoretically it will not hurt anything to run generator while connected to shore power.

However, best practice is to use one power source or the other, but don't connect both at the same time.

And, why would you want to?
Title: Re: restoring a 1986 grand villa 33
Post by: Mike Leary (RIP) on February 07, 2017, 06:42:45 pm
  Is there a problem running the genset while plugged into shore power?
Prolly not, these days. I do un-hook, and always have. It comes from my years as a Building Contractor where a HO would "shoehorn" a gen set in without proper isolation switching. Many linemen were killed when a gen-set "backfed" into their wires. It's a old habit, and like having EMS, you sleep better.  ^.^d
Title: Re: restoring a 1986 grand villa 33
Post by: red tractor on February 07, 2017, 07:41:28 pm
To remove the converter you have to loosen the nuts on the threaded rods and let it down. Those converters were very hard on batteries as they tended to overcharge the batteries. The new smart converters are much better.
Title: Re: restoring a 1986 grand villa 33
Post by: bofzwell on February 08, 2017, 08:42:44 am
My coach had the same factory setup that you have, and the converter fan was loud enough to be annoying. I bought a Battery Tender smart charger as a stop-gap while I was revamping the converter, and now keep it stashed in the vacuum cabinet. It's a great backup.
  I bought a smart converter to replace the original unit. The new one is considerably smaller and, at most, is 1/4 the weight. The remaining threaded rods (too difficult to remove without causing damage) were  very long and obstructing to the available space, so I bought additional nuts and washers, cut plywood  to make shelves, drilled for the rods, and now have adjustable shelves under the converter to store the tank drain hose fittings and goo-stopper gloves. Works VERY well. One shelf was cut from heavy metal mesh to hold the new converter and give it free flow of cooling air. The existing wiring is plug-and-play.
The new charging units are not expensive, are very efficient, light weight, and free up a lot of new storage space. They also will not fry your expensive batteries! Win Win Win.
Title: Re: restoring a 1986 grand villa 33
Post by: bofzwell on February 08, 2017, 10:12:06 am
Another thing; when doing ANYTHING to enhance your Foretravel, Search this forum and USE THIS LINK!!!
      Foretravel Motorhome technical help and information links (http://www.beamalarm.com/foretravel-links/foretravel-technical-help.html)
Title: Re: restoring a 1986 grand villa 33
Post by: Mike Leary (RIP) on February 08, 2017, 11:33:29 am
That obnoxious "humm" is what our Airstreams had, called the "Univolt", had to turn it off at night. Brett installed a "True Charge 40" in this coach, and I never even hear it!  ^.^d
Title: Re: restoring a 1986 grand villa 33
Post by: Richrpilot on February 08, 2017, 11:53:10 am
Are you sure the hum is from the converter and not the transfer switch (?) next to it. Mine still hums after I installed a progressive dynamics smart charger.
Title: Re: restoring a 1986 grand villa 33
Post by: Mike Leary (RIP) on February 08, 2017, 12:44:22 pm
Are you sure the hum is from the converter and not the transfer switch (?) next to it. Mine still hums after I installed a progressive dynamics smart charger.
I would be suspecting the charger. Our TS was factory, and made no noise. We took a power hit that fried our transfer switch and the tech had a heck of a time finding one. Found a "almost version" in Canada and it works fine, Not a ATS, which I'd never have. After that little "CB Episode", we bought a EMS from Progressive Industries RV Surge and Electrical Protection industry lea (http://www.progressiveindustries.net)     
Title: Re: restoring a 1986 grand villa 33
Post by: stump on February 09, 2017, 07:16:52 am
You need a transfer switch with a DC relay they stop the hum. Plenty available Google is your friend.
Title: Re: restoring a 1986 grand villa 33
Post by: Texas Guy on February 10, 2017, 12:33:03 am
A very light sanding and some scratch cover did wonders for

the wood on the coach I am working on. Followed it up with

some Deft. If it is a larger area use some wiping stain.


Carter-