Had an issue with LF air bags not inflating.
When @ Cummins had the mech take a look and he found that the wiring plug under the pad was so loose it fell out, so he used a zip tie to hold in place.
got home and after the rain stopped went to raise the coach to block up and nothing.
Removed the 4 little screws and took a look see .. all plugged it and tight, so wiggled the plug and the lights came on but nothing much worked could raise the right side of coach and could dump air but not raise.
Thinking that the plug is not making contact with the row of pins or the wires were not secure in the plug , so removed the zip tie and unplugged and re-inserted plug to touch pad.. now nothing at all no lights or anything.
Have I blown a fuse? and if so where would I find it?
Am thinking the the wires to the plug may have come apart inside the plastic plug.
pls note!
I am color blind so have very little experience messing with wiring, & have nothing but a 12 v probe circuit tester (either it's lit or not)
Ideas?
There are fuses in the control box in one of the forward storage bays.
OK thnx.
downloaded a pdf manual, so reading reading reading.... need more coffee