Title: ABS control module location and how do you do a reset
Post by: Art & Polly on February 22, 2017, 09:01:31 pm
Post by: Art & Polly on February 22, 2017, 09:01:31 pm
Uh-oh read about the red abs warning light coming on so my coach decided to follow suit and lit hers up. Happened to be heading to Creative Coach for another issue and they found the front wheel sensors were loose. The issue developed when they couldn't find the control module to do a reset. Foretravel factory thought it was in the bay with the aux air compressor on the back wall. Not to be found. Any help on how to do the reset and where the module is located would greatly be appreciated. Thanks in advance.
Title: Re: ABS control module location and how do you do a reset
Post by: John Duld on February 24, 2017, 10:31:16 am
Post by: John Duld on February 24, 2017, 10:31:16 am
Art,
Is there a fuse in the fuse block for the ABS?
If there is you might try to reboot the system by removing and reinstalling it after around 30 seconds.
Is there a fuse in the fuse block for the ABS?
If there is you might try to reboot the system by removing and reinstalling it after around 30 seconds.
Title: Re: ABS control module location and how do you do a reset
Post by: Art & Polly on February 24, 2017, 02:46:58 pm
Post by: Art & Polly on February 24, 2017, 02:46:58 pm
Good thought I'll have to check at location I imagine that would be automotive.
Title: Re: ABS control module location and how do you do a reset
Post by: Michelle on February 24, 2017, 03:07:52 pm
Post by: Michelle on February 24, 2017, 03:07:52 pm
The issue developed when they couldn't find the control module to do a reset. Foretravel factory thought it was in the bay with the aux air compressor on the back wall. Not to be found. Any help on how to do the reset and where the module is located would greatly be appreciated. Thanks in advance.
Not sure in a 2002, but look on the back walls of half-deep bays for a silver box that says Wabco on it. I'm only familiar with a 2003, but in that case it is second bay from the front axle on the driver's side, same bay that houses the inverter, transfer switch, aux compressor, HWH "cans", and 12V resettable breakers.
Title: Re: ABS control module location and how do you do a reset
Post by: Art & Polly on February 26, 2017, 08:16:12 am
Post by: Art & Polly on February 26, 2017, 08:16:12 am
Thanks Michelle That is exactly where Foretravel said it was but I must be blind in one eye and can't see out of the other. I took pics of those compartments and sent to Foretravel They must still be studying them because I haven't heard back for 8 days. I'll keep looking I found an aluminum box buried behind the vacuum generator for my toilet, but I think that is for the Allison.
Title: Re: ABS control module location and how do you do a reset
Post by: Michelle on February 26, 2017, 08:45:54 am
Post by: Michelle on February 26, 2017, 08:45:54 am
Thanks Michelle That is exactly where Foretravel said it was but I must be blind in one eye and can't see out of the other. I took pics of those compartments and sent to Foretravel They must still be studying them because I haven't heard back for 8 days. I'll keep looking I found an aluminum box buried behind the vacuum generator for my toilet, but I think that is for the Allison.
Post the photos here - maybe one of us can help you. Here is what the one in a 2003 looks like - back wall near the slide manifolds; it's the silver box that says Wabco and is mounted so "Wabco" is upside down.
Yes, the silver box near the vacuum generator is likely the Allison ECU.