Getting ready to leave Dawson City, Yukon. The travel light isn't coming on on the control panel. No lights are on. I have no idea which of the control boxes in the bay are which, but looking at the manual, the red light is on, no others. The book says it's a problem with the module. What module are they talking about? Can I get one from NAPA up here...on Sunday🙄?
The suspension is up so I'm going to head on for Houston!☔️
no lights come on at all? look for a fuse or power going in.. box on the left (facing the bin) (on the passenger side) you should have 2 with a clear face plate. (possibly).. if you have a zip dee awning.
if you cant get into gear there is a slotted flat switch on the side of the box in the bin. turn it with a flat head to 220 and it will override the controls.
No lights at all. Goes just fine. The fuse by the leds is good. Thanks
Might try unplugging the cable from the hwh control panel by your left arm inside the coach and plugging back in, sometimes that will work.
Tried the plug, no joy. Look at the "emergency" leveling procedures, they assume you have lights and control from the panel ! What a bunch of
Can you take a meter and confirm that you are getting 12 volts to the computer?
What computer, where? The box on the front end of the bay has the red LED lit, according to the book that means 12v are available.
The box referred to in reply #1.
Maybe you could remove power(if it's present) and wait a few minutes then reconnect it. Just something to try.
Reboot!
Maybe the HWH touch control panel at your left elbow? Try to get through to the Help desk. They are not the fastest in returning phone calls but they are good. There are only 2 or 3 guys that man that department. Good luck.
Seems to be going to Travel mode, just no light, Manual control, or leveling. Drifting towards Houston !