Anyone have an idea where one of these can be had? It's the windshield washer hose connection .
Fleetwood 47143 Nozzle Windshield Washer Denso LA146305-0450 | eBay (https://www.ebay.com/itm/Fleetwood-47143-Nozzle-Windshield-Washer-Denso-LA146305-0450-/321538456503)
I drilled mine out and glued a new nozzle in that would attach to the hose, but you might find them at a truck pro or other truck supply.
Nozzles & Kits : Midwest Bus Parts, We Do More Than Bus Parts (http://www.midwestbusparts.com/index.php?main_page=index&cPath=16_316)
Thanks guys, got to see if I can get my big hands on the fitting under the dash.
I pretty much did the same as Forewheelers did. I stuck a piece of S/S wire in the two pieces to align them, then used marinetex. So far, so good.
I found a 1/8" hose nipple, drilled out the part sticking out of the front of the bus, and glued in the nipple. It has held up for two years now and cost all of 95 cents.
Len
I did some work on my wipers and the washer connection has a nut on the inside to hold it in place and if the fitting is damaged it can be replaced. Do a search for "Wiper Problem 96 U270" to find out how to get to that fitting. Right side is easier than the left side. edit: do both sides if you have to remove the flat dash panel.
Another washer hose and parts supplier. I got new hoses and sprayer heads from them.
Wiper Blades and Accessories - Wiper Accessories - Wiper Nozzles, Tubing &... (http://www.unityparts.com/wiper-nozzles-tubing-wet-arm-kits/)