Anyone know off hand which two wires would be the exciter F+ F-? My generator has very little if any output and I would like to try a 9 volt battery. Model MH 10 TFRR. Thanks,rw
Could circuit breaker on the Gen be tripped?
How to "flash" a generator when output is lost due to loss of excitation (http://www.dieselduck.info/machine/03%20electricity/flashing_generator.htm)
Some power tech generators have f+ and f- labeled on the voltage regulator module.
Not your exact model, but points you where to look.
https://cdn.shopify.com/s/files/1/0062/4072/files/PT-8-10-12_KSI_OPERATORS_MANUAL_1.pdf?376
Call Jeff at Powertech and get his input. I fried a generator just by changing the regulator and matching the F+ F- #3 and the wire to the circuit breaker. A phone call would have saved me $3,000.00
The wires are labeled are F and C. F is Positive. The circuit tested approximately 27 ohms and flashing did not make any difference. I will Powertech after the holidays. Thanks for your help Foretravelers! rw