We are unexpectedly marooned at home for med testing and procedures. I want to use an extend a stay for our propane. (House is rented)
When I looked at the system I noted a fitting I am not familiar with and have attached a picture.
1. Is the small nut covering a port I can use without the extend a stay?
2. Can I remove this fitting from the valve and replace with an extend a stay.
3. For those in my year group...will I need an adapter? The Camco picture showed a funnel shaped female end but the actual fitting is not.
Thanks!
George,
The vent with the red ring around it is a fill indicator and must stay in place.
If you are talking about the 1/4" pipe plug in the "T" then you may be able to tap into your system there with an Extend-a-stay.
Mike
https://www.menards.com/main/outdoors/outdoor-recreation/camping/camping-accessories/camco-1-lb-rv-campfire-propane-adapter/p-1444426142062.htm
not sure but this might help
Yes Mike I was looking at the 1/4 fitting. Saw that plug and thought something must have gone there in the past as there doesn't seem to be a good reason to have it.
Dave that fitting is for refilling the little green bottles from the 20/30. Got one. Thanks.
George,
I have seen that used to hook up a fire pit, BBQ grill, and an external tank to back feed into your system.
Mike
Thanks Mike!