My understanding of our leveling system is that upon arrival at a campsite I push the leveling button twice and the HWH computer automatically levels the coach by dumping air on the high side, then adding air on the low side if necessary. Once the coach is level, the same computer will check level periodically and dump air from the high side or add air to the low side using an auxiliary compressor located under the step. Am I correct here?
Where does the power for the compressor come from? More specifically, where is a fuse or circuit breaker? Since it is reasonably nice outside this afternoon I decided to see if I could find one because our coach isn't staying level and I haven't heard the aux compressor run. I found what looked like an in-line fuse holder but when I opened it I didn't find a fuse, but rather just a connection. I haven't found any other fuses or circuit beakers marked for that compressor.
David,
Yes that is how the system is made to work.
That breaker should be in the basement behind the fiberglass cover. It should be a 15 amp that has to be reset by pushing a little button on the breaker. If you have your B-2126 print it will show you the breaker you are looking for.
Mike