Print Page - Poe 15 v Rust Bullet ?

Title: Poe 15 v Rust Bullet ?
Post by: rbark on May 05, 2018, 11:04:03 pm

Looking for the best product to coat the bulkhead steel with. Any thoughts?

Title: Re: Poe 15 v Rust Bullet ?
Post by: Jim Frerichs on May 05, 2018, 11:07:51 pm

Hi Rich,

Ospho is very well recommended. Use it prior to painting metal.

Jim

2002 U320

Title: Re: Poe 15 v Rust Bullet ?
Post by: John44 on May 05, 2018, 11:30:53 pm

Have used both por and rust bullet,follow the directions and use the top coat,I bought the small six pack.

Title: Re: Poe 15 v Rust Bullet ?
Post by: jwilcox on May 06, 2018, 12:15:19 pm

I like KBS coatings better than POR 15 but have never used rust bullet.

Title: Re: Poe 15 v Rust Bullet ?
Post by: craneman on May 06, 2018, 12:29:41 pm

I use the Ospho to stop the rust and paint over with Rustoleum epoxy paint.

Title: Re: Poe 15 v Rust Bullet ?
Post by: joeszeidel on May 06, 2018, 12:48:52 pm

I have used POR-15 on a 1954 chevy pick up frame that was rusty. Went on easy and that paint is tougher than the steel.

Title: Re: Poe 15 v Rust Bullet ?
Post by: jwilcox on May 06, 2018, 02:28:31 pm

Love the 54 chevy's. This is one I restored a few years back. Used a lot of the KBS coating products and was very happy with the results.

Title: Re: Poe 15 v Rust Bullet ?
Post by: rbark on May 06, 2018, 04:44:01 pm

Not familiar with KBS. Can I paint it over a rust converter I have put on the metal already? I use a product called Corroseal.

Title: Re: Poe 15 v Rust Bullet ?
Post by: jwilcox on May 06, 2018, 07:48:51 pm

Not sure would have to call KBS to be sure.

Foretravel Owners' Forum