Hi Folks.
I need to know how to remove a cracked and peeling front plastic chip guard. I know to apply heat to peel it off but removing the adhesive that remains on the paint is another issue. I read somewhere that xylol can be used but I want to make sure that I use the right product and tools. Has anyone done this? I'd rather do the work myself if I can.
Thanks,
John
I would check with 3M. Years ago I bought a Makita orbital polisher and 3M products to remove a vinyl stripe and glue from a fglass rv.
I used this when removing my adhesive.
3M General Purpose Adhesive Cleaner 08984: Amazon.com: Industrial & Scientific (https://www.amazon.com/3M-General-Purpose-Adhesive-Cleaner/dp/B0789RQFLX/ref=sr_1_6?ie=UTF8&qid=1527819352&sr=8-6&keywords=3m+adhesive+remover)
I used a steamer to remove the film.
Mark
I tried several products and Rapid Remover is the product I found by far the best. It was easy to work with and very low odor. Ended up using about a half gallon to remove the adhesive left from the 3M film. Purchased the gallon from a local vinyl sign company for $52.00, I believe it is available on Amazon.
Also have found it to work great on sticky vinyl inside the coach.