Took our RV out to winterize/dump tanks, check tire pressures and our " idiot" brake warning light came on.... brake pedal is soft... stops and can pump to get pressure.. but i cannot find the location of the brake fluid reservoir /master cylinder...
Any help on location would be appreciated...
The P-30 is a Chev/GMC platform, you might find a schematic on-line.
A lot of internet research and found the schematic for an 87 Winnebago with a P30 Chassis.... it sits between the drivers front tire and the engine manifold.. there is a heat shield there but either FT or Original owner (Paul Newman) cut an access square to get to master cylinder. Watched a Winnebago owner wrestle with removing the heat shield to access the cylinder. . Glad our FT builders gave us some access...
Thanks.
Good deal! I just remembered our Airstreams had the same location, and a BEARCAT to check/add fluid!