Hello, new to the forum. About to take the plunge on a 2000 U320 4010.
I noticed that there are 2000's that have different style headlights/front end caps. Are there any major pro's/con's to these? The model we are considering using the low mounted rectangle lights that I've read are sourced from the Ford Bronco of that year. I've also read they are dim and there are modifications to voltage.
Is this correct, and if so, can one switch from this style to the more modern style? Any recommendation and idea of a cost if upgrades are an option?
Looking forward my future road travels. Thanks in advance for advice.
There was only one style by the factory when they were made. The changes you see are from the upgrades that James Stallings designed over at Xtreme Paint and Graphics. They put out a lot more light and make night driving so much easier. You can get yours modified for about 3K or so.
Welcome to the Forum, ITguy! Headlight conversions are cool. Read all about it:
Xtreme Paint & Graphics Home (http://www.xtremegraphics.net/services/conversions-headlight/)
Here's another: Headlights: Attaining Enlightenment (http://www.foreforums.com/index.php?topic=30223.msg260857#msg260857)
Glen
Thanks for putting me on the path. That makes sense now... if they are not Ford lights they are basically custom... got it.
Starting research mode now..
Welcome to the forum and good luck on your search for a U320. Lots of good info here.. Mine has the conversion...
If you are handy, you can do a conversion yourself using the stock headlight buckets and modifying them to accept 5x7 glass lights utilizing an H4 light bulb. Lots of fabrication involved, and it's not a completely finished product, but the results are terrific.
Headlights: Amazon.com: Nokya H6054 Sealed Beam Headlight Conversion 7X6" (200mm) H4... (https://www.amazon.com/gp/product/B00GUPIFS8/ref=ppx_yo_dt_b_asin_title_o07__o00_s00?ie=UTF8&psc=1)
Clear, real glass, high quality sealed beam headlight conversion. $84/pair, you need two pairs = $168
Headlight Buckets: 31444 by UNITED PACIFIC - 5" x 7" Headlight Bucket (https://www.finditparts.com/products/8262622/united-pacific-31444)
$32 each, you need four total = $128
Headlight Bezels - take your pick (these are cheap plastic chrome units):
a) 41112 by UNITED PACIFIC - Chrome Single 6" x 8" Headlight Bezel (https://www.finditparts.com/products/8264827/united-pacific-41112)
b) 32371 by UNITED PACIFIC - 10 LED Single Headlight Bezel w/ Visor - Amber... (https://www.finditparts.com/products/8262925/united-pacific-32371)
The first step is to remove your stock headlights. The inner light on each size is separate, the outer light is attached to the same bucket that the turn signal is attached to. Take everything out and remove the marker light. Remove the beige light bucket from the black mounting bucket.
You will need an electric heat gun. Heat the edges of the lense to melt the adheasive and work your way around the lens to remove from the housing. This is not an easy process, and your are going to ding up the housing and likely your hands with the screw drivers that you use for this process. There may be an easier way that using heat and force, but I'm impatient.
Next, use a dremmel to cut out the bucket, following the factory lines as shown here. Take your time. Undercut if you want and whittle away periodically test fitting the new 5x7 headlight bucket in from the front.
Once the headlight bucket fits in the modified housing, you need to make a backing plate. I made mine out of 3/4" plywood. Eventually I will remake them out of a sheet of plastic, but this suffices for now. I traced the back of the bucket to create the inside cut profile, and traced the face of the bucket to create the outside cut profile and cut the wood out with a jig saw. Transfer the holes from the bucket to the wood when you trace the face. You have to do some trimming and sanding on the backing rings to make them fit right due to the three uprights you can see in the photos from the back side.
Install the new glass headlight housing into the bucket, and re-install the stock housing onto the mounting bucket and re-install onto the coach.
I admit, my explanation is overly simplified. I think I have probably two full weekends into the fabrication, and I have 6 hours (yes, 6) into adjusting the headlights properly. It was time and money well spent.
You will need to buy some electrical adapters. These 9007 to H4 adapters have the right plugs, but you need to depin them and swap the position of the wires to match with the 9004 wiring of our stock head lights. I will say, these plugs are garbage, but they worked for me in the short term. I am on the search for a better option for plug adapters.
Amazon.com: 2PCS Vplus 9007 Male to H4 Female Adapter Headlight Conversion... (https://www.amazon.com/gp/product/B0714NF8ZB/ref=ppx_yo_dt_b_asin_title_o01__o00_s02?ie=UTF8&psc=1)
Here are the headlights I used, color is great and they match the stock wattage:
Amazon.com: Philips X-treme Vision +130% Headlight Bulbs (Pack of 2) (H4... (https://www.amazon.com/gp/product/B00QJWUPC6/ref=ppx_yo_dt_b_asin_title_o00__o00_s00?ie=UTF8&psc=1)
Low Beams:
High Beams:
Future upgrades include re-wiring the lights so that all four low beams are on at the same time, and then adding relays to power the lights so they aren't powered through the switch. I'll get some finished photos over the weekend, apparently I forgot to take daylight finished photos after completing the install over the Christmas holiday.
Evan, thanks for posting...thumbs up on your ingenuity and perseverance with this mod. I'd considered the same route as I like the aggressive stance of the original low slung lights. I will probably attempt this when I get time this summer. Woody.
Be advised that I wired my lights 4-on lows and was flashed incessantly by oncoming drivers. It's their perception that you have high beams on, more than brightness I think. Switched back to outer lows only and no more flashing.
I just can't see spending $3500 plus travel and time for the Xtreme upgrade. It looks fantastic, but this solution likely provides more light at a FRACTION of the cost. I've considered designing a retrofit kit to make this less of a DIY upgrade, but I just don't have the time to develop and support a product with my personal and professional obligations.
This project will test your patience. You will get lots of dirt in your eyes fussing with removal and re installation lying under the coach. The passenger side is much more difficult due to all of the wiring and plumbing routed behind the headlights up through the floor behind the relay board under the dash. It was a bit easier for me as I have removed/rerouted a significant volume of those wires and removed the AC hoses completely (dash AC was worthless and a waste of space and money to repair/maintain so it went into the garbage).
I don't think I'll have any issues with the 4-low mod. These housings have a very distinct cutoff line as you can see in the above photos, so as long as the lights are pointed in the correct direction, they should not bring any unnecessary flashing from oncoming traffic. I think the factory headlights are waaaaaayyy off as far as adjustments go. Just by visual observation, it appears both sides were pointed way out towards the ditch instead of straight ahead. I just don't think they have enough distance or throw and have too much scatter to make it obvious they are so far out of adjustment.
Well done on the conversion Even, The Ford truck lights are dim due to running all power through the switch as you point out. Adding a second switch or a relay will improve them even more. Googlelate Ford headlights.
Is there not a projector LED deal to fit those buckets? I took out my H4 lights and added focused LED . It made the H4 look like they were off . Plus the LED should reduce the switch draw . No need to run all 4 either .
Think the lights are from a 92 Bronco,go to carid.com and put in the Bronco,you'll get lots of choices,have dealt with them,good
prices and fast shipping.Another choice would be Nilight.com,good quality led lights,you buy direct from them.
ONE reason the ford truck lights are dim in our application is due to voltage drop of the electrical circuit. ANOTHER reason is the headlights are 1990's technology and the optics are just poor. The LED bulb upgrade is an easy upgrade, but you still have a crappy lens in front of that bulb that scatters the light everywhere. The headlight housings and optics I used are designed to work with an H4 bulb and provides a proper cutoff, keeping light out of on-commers eyes.
When I get the all four low beam mod complete, I'll post a photo. It will be a huge difference. There is a distinct dark spot at night in the center of the two beams. The four-low mod will eliminate it.
Lots of
Also, not sure what exactly you meant by projector LED - a true projector headlight can be made to fit in the glass headlights that I used, but the cost is upwards of $350-$500 per pair for the retrofit. Not worth the cost to me.
Just putting an LED bulb in the stock housings is NOT considered a projector headlight, as the optics of the stock lens do not work with a projector assembly. Hope this makes sense.
Yes, the original lights are from a Bronco, but not the 92 model. The model years are 87-91. I didn't have any issues finding stock replacements. Replacing them would have been an easy option, and would have provided a much clearer lens and more light than I had previously, but the optics are still very poor. The cost for new lights would have been the same (or more) as what I have into the upgrades, but would have been far less labor intensive. Also, I would only buy NOS (new old stock) housings on EBAY for replacing the original headlights if that was the route I went. Anything you buy from carid.com or similar sites (amazon, ebay, RockAuto) are going to be garbage chinese re-makes that are likely to deteriorate very quickly..
Right on using an LED inside the stock housing/reflector . I was talking about the entire light .
Something like this;[LED DRL] FOR 1992-1996 FORD F150/F250/F350 BLACK AMBER BUMPER HEADLIGHTS/LAM... (https://www.ebay.com/itm/LED-DRL-FOR-1992-1996-FORD-F150-F250-F350-BLACK-AMBER-BUMPER-HEADLIGHTS-LAMP/201522079095?fits=Model%3ABronco&hash=item2eeba6e577:g:Y0MAAOSwkV5aXrdB:rk:13:pf:0)
Or this ;92-96 FORD BRONCO F150/250/350 PROJECTOR HEADLIGHTS BLACK HALO LED HEAD... (https://www.ebay.com/itm/92-96-FORD-BRONCO-F150-250-350-PROJECTOR-HEADLIGHTS-BLACK-HALO-LED-HEAD-LAMPS/173615581057?fits=Model%3ABronco&hash=item286c4b8781:g:6s4AAMXQfFJRNXJb:rk:7:pf:0)
Unfortunately those are not the correct housing. Our headlights are off of an 87-91 model bronco, not the 92-96, and from all of my research, no aftermarket projector options are out there for our style of headlight otherwise that would have been the easy solution.
Agree on the Chinese junk,try the Nilight,it's Chinese but higher quality junk.
Here are some photo examples of a true projector retrofit into the glass housings that I used. These would look awesome, and function very well, but I can't bring myself to spend nearly $1000 for a custom glass headlight housing that is 1' from the road surface.
7x6/H6054 Bi-Xenon Projector Retrofit Service - (http://www.club4ag.com/forums/viewtopic.php?f=15&t=19729)
This had turned into a great discussion thread. So much to process. I like do-it-yourself approach, but I'll have to get up the confidence in my fabrication skills. Lot's of amazing ideas to consider, thanks so much for sharing.
Took me a bit, but here are some installed shots. Don't mind the missing fog light - I am playing with replacing the fog lights with some LED lights and was taking some measurements. This shot gives you a good idea of old vs. new headlights with my co-workers U295 parked next door. (he liked my Foretravel so much he went and bought one himself, although he is dissapointed he didn't buy the 320 for the big Cummins 8) )
Any update on how your headlight conversion is holding up? Any regrets or do-overs? Thanks!
If you're referring to my conversion documented in this thread, I am thrilled.
Two complaints:
1. Apparently the right side was repaired at some point in time and the outer light does not fit well. It's probably something only I will ever notice, but it bothers me. It is out of adjustment and can't be adjusted any further and is OK, but points a bit down and away from where I'd like it to be.
2. I want to do a dual low beam on mod as the low beams still aren't bright enough to my liking. In factory configuration, only two headlights are on in low beam mode, and all four are on in high beam mode.
I just drove 3000 miles with 1000 of those at night, and the difference between the new setup and the old setup is night & day, pun intended!
Well worth the efforts.