Are there competent service shops out there to service Aqua Hot or are we committed to Motor Homes of Texas for this needed service? Nothing against MH of Texas, it is a long drive from here, Dotha, Alabama.
Service locater from their web site -
http://www.aquahot.com/Service-Help.aspx
Rudy Leggett, Roger Berke and a few others stand out - basic service is easily done by any of these folks and a lot of other shops not on this list. Many owners do the annual service themselves, buying parts from Rudy on-line.
Tim Fiedler
Sure Start Soft Start (http://www.gen-pro.biz) - home of SureStart soft starters TCER Direct (http://www.tcerdirect.com) - home of Generac Approved Aluminum and Copper TCER Composite cable generator-gas-prod (http://www.generatorgasproducts.com) - home of X-Riser Gas Risers for PE installation Call me at 630 240-9139
Gen-Pro
Tom,
I will be in Orange Beach, AL, in April and Foley, AL, in May. We can get together as Dothan is not to far from either.
If you can run your tools, I can train you to service your burner. Let me know if any of this appeals to you.
All the best.
Tom, I have gone to the Aqua Hot certification school if you happen to come to the Little Rock Area.
I would Just need a heads up if you wanted me to have parts on hand.
Chris
Just a heads up soliciting business is only allowed if you are a commercial member.
Lloyd Degerald is in Parron, AR. He is highly competent.
501-258-8624
Jim
2002 U320
For anyone desiring Aqua-Hot service, here is the Aqua-Hot website list of authorized service centers:
http://www.aquahot.com/Service-Help/Service-Locations.aspx
My point was to say if someone wanted help and didn't have parts I could get them ordered so they would be available upon arrival.
Don't mind helping as long as they pay for parts.
Chris
Some comments crack me up...
When I serviced my aquahot the burner chamber was oval instead or round so I had that whole mechanism replaced had all the regular parts replaced as I didnt know when the last time it was looked over.
Replaced the metal brain at that time but I have a feeling it wasnt part of the problem as the coil went out not long after the updates were completed
Rudy, We'll be in Dauphin Island CG April 11 -16, coming from Destin, Fl. I can run my tools, and would be very interested in having you train me on our Aquahot unit. Will PM you...
Thanks, Jeff