Does anyone know the size of the acorn nut for the small arm of the windshield wipers?
(https://photos.smugmug.com/Foretravel/Forums-post-1/i-cLvZZqp/1/b3ebd981/L/20181214_114225-L.jpg)
Not sure But these folks will be able to hook you up
Cap Nut — AM Equipment (https://www.amequipment.com/shop/cap-nut)
Thanks stump, I may have to take the other one off to figure the size.
I did about 300 miles in rain yesterday and dont know when it came off.
Thanks. I had bought new dyna wiper arms but wanted to replace the rest of the faded parts.
Ordered all of the parts.
Thanks bob
Bob can you share with us the part numbers and where you bought the wiper arms, etc.?
This is where I bought new arms and nuts from and also new proper sized smaller washer hose.
Wiper Arms (http://www.buspartswarehouse.com/Products/Wiper-Arms/)
While we are on the wipers,mine hit the mirror arms when on the outer stroke,makes a thud but still works,don't want to open a
can of worms now but has anyone repaired that problem?
I had this problem when I mistakenly installed 28" blades. It ended up breaking the wiper arm. I replaced both arms with 26" blades.