I noticed when I got to my destination the other day the small arm on my drivers side was hanging in the air. At first I thought the nut had just come off but after the festival I was going to go get a new nut and I dont think that will fix it.
from the pictures what all do I need to replace?
Thanks
(https://photos.smugmug.com/Foretravel/Forums-post-1/i-9WKjBLC/0/e9174b25/X2/20190328_132039-X2.jpg)
(https://photos.smugmug.com/Foretravel/Forums-post-1/i-sx9QX7N/0/66913eab/X2/20190328_132119-X2.jpg)
Drill and tap it to a machine screw, add screw and washer and go.
See if one of these is the correct replacement:
Wiper Blades and Accessories - Wiper Accessories - Wiper Linkages & Pivot... (http://www.unityparts.com/wiper-linkages-pivot-assemblies/)
Thanks, I can file the end flat and use a center punch to mark it and then step drill it.
can those be replaced by just removing the cover plate show in the picture or do I have to take the dash apart to get to it?
What's the scoop about all the rust? looks like something that would have happened on one of my PNW towboats. :o
I guess just the material and age? it was like that last year when I got it.
Here is a video, doesn't look easy.
Pantograph Arm and Adapter Replacement (http://www.foreforums.com/index.php?topic=36317.msg344592#msg344592)
Wow I dont think my arms will reach that far "LOL"
It's not easy! But is doable. Someone on the forums just posted a video on that. Vossex2 I think.
Never mind , I see the videos already posted.