Print Page - 2007 Nimbus 336 Drivers Slide will not retract

Title: 2007 Nimbus 336 Drivers Slide will not retract
Post by: Kath and Mike Reinert on July 28, 2019, 12:17:33 pm

Hi there, We have a jumper connecter but we don't know how to use it for a bypass. This is for the HWH room extension. Any help sure would be appreciated.

Kath & Mike

Title: Re: 2007 Nimbus 336 Drivers Slide will not retract
Post by: rbark on July 28, 2019, 12:48:36 pm

Either Barry Beams tech website or HWHs trouble shooting section should help you with that. I would start there first.
Good luck!

Title: Re: 2007 Nimbus 336 Drivers Slide will not retract
Post by: Eric & Alena + 3 on July 28, 2019, 01:50:54 pm

Does the pump come on when hitting the retract? The main HWH relay and or the pump relay go out. If the coach leveling system is working then it might just be the pump relay. On my coach they are right next to each other on the pump. As a side note the touch pad will appear to operate correctly even with a bad relay.

Title: Re: 2007 Nimbus 336 Drivers Slide will not retract
Post by: pibutler on July 29, 2019, 08:03:11 pm

Did you get your slide issue resolved. I'd be interested in hearing what the fix was.

Pat

Title: Re: 2007 Nimbus 336 Drivers Slide will not retract
Post by: Carol & Scott on July 30, 2019, 08:59:46 pm

You might try here -

This is actually an HWH Tech web page.

CONTACT US (https://www.hwhcorp.com/web1010_techsupport.html)

Foretravel Owners' Forum

Foretravel Motorhome Forums => Foretravel Tech Talk => Topic started by: Kath and Mike Reinert on July 28, 2019, 12:17:33 pm