It appears my link 2000 is locked up, it doesn't appear to be controlling any thing and the green light is under amps but volts are showing. Anyone have any sperance with them?
You have to do a hard reset. Refer to the owner's manual, but basically you have to remove power to the unit for a set period of time.
Thanks Amos, I plan on that in the morning.
Any one happen to know where the fuse/CB is for the link 2000 wireing diagrams don't seem to show it.
Bruce,
I think (long time ago) I put mine buy the shunt by the coach batteries.
Thanks mine came new with the coach.So FT wired it with their numbered white wire, I can't see the number on the wire.
The hard reset took care of the problem. Just want to find the circuit for the next time. Better than removing the grounds.
Bruce,
I'm late to the party but this may help in the future.
The feed to the Link 2000 should come off one of the non-self resetting breakers that are hid behind the white cover in the basement on your age coach. IIRC it is the 2nd or 3rd one from the bottom on the left hand row of breakers. It should be like 10 amp. On our unit there is also a fuse in the power line coming into the back of the unit. The down side is you have to pull the 2000 out to get to the little fuse holder.
Mike
Thanks Mike, already looked behind the link no fuse. I'll see which one it is down stairs
Found it Mike 3rd one up on the left 10 amp. Thanks.