The step on my 2008 Nimbus will not retract when the ignition switch is on and the door is closed. Where do I start trouble shooting the issue? Is the system fused and if so where do I find the fuse?
Is your step air operated or electric? Too new a coach for me to know.
If you have the single air operated step like on mine, there are two air cylinders that move it in/out. And a small air solenoid setup near the passenger side of the generator under the coach. I would start at that solenoid bank and check all wires and air connections. The solenoid setup is for both the step cover and step.
This is an all-electric step system with 2 steps that come out. (Not air operated.)
Tested the step switch and there is power to it.
If there are fuses, where are they?
Thanks.
Is it a kwikee step if so the controllers go out on those
The door open switch can cause the step to stay out even with ignition on.
A Kwikee step has in line fuses behind the panel in front of the passenger seat. If they are good you'll have to look at the step motor.