Print Page - Aqua hot install

Title: Aqua hot install
Post by: 18360 on October 11, 2019, 11:13:48 am

I got a refurbished Aqua Hot back and a dealer is installing it.
He said he can't get two zone to accept the antifreeze.
Aqua hot said something about purging to get air out but the instructions are vague on how to do it.
Any suggestions.

Title: Re: Aqua hot install
Post by: DavidS on October 11, 2019, 11:20:55 am

Maybe a 12v water pump with antifreeze? It will push the liquid through..

If this company has done any typical Winterizing I think they could accomplish this.. just a guess.

Title: Re: Aqua hot install
Post by: Travelin' Man (RIP) on October 11, 2019, 11:22:29 am

Each zone should have a circulation pump.

Title: Re: Aqua hot install
Post by: Rudy on October 11, 2019, 01:08:14 pm

18360, I have sent you a PM, please call. Not to hard to solve.

Title: Re: Aqua hot install
Post by: bigdog on October 11, 2019, 01:17:14 pm

Is your dealer Aqua Hot qualified and if so, Do they have much experience? Either way, I might be a bit concerned.

Title: Re: Aqua hot install
Post by: 18360 on October 12, 2019, 08:22:35 am

We brought it to "All Seasons RV" in Streetsboro here in Ohio.
Aqua Hot in Colorado recommended them.
They started to install it this past Monday.
But because it is an updated version a lot of the fitting sizes changed.
However it is all hooked up.
Just this one last thing.
They were not working on it all this time as they have plenty of other customers.
I will let you know if the outcome.

Foretravel Owners' Forum

Foretravel Motorhome Forums => Foretravel Tech Talk => Topic started by: 18360 on October 11, 2019, 11:13:48 am