Print Page - oil pressure sender

Title: oil pressure sender
Post by: red tractor on November 30, 2019, 05:09:32 pm

Looking for the part number for the oil pressure sending unit for 98 u270 8.3 cummins It has 2 terminals It does the dash gauge and the low oil pressure light in the dash. Thanks for any help Ron

Title: Re: oil pressure sender
Post by: Rudy on November 30, 2019, 05:23:20 pm

Ron, take the sender to NAPA and ask to match it

Title: Re: oil pressure sender
Post by: red tractor on November 30, 2019, 05:26:37 pm

Thanks Rudy

Title: Re: oil pressure sender
Post by: jor on December 01, 2019, 10:09:43 am

Post that number when you get it, please. I have an issue I've never been able to figure out. I replaced the oil sending unit when I first got this coach but still have this issue. The analog oil pressure gauge reads correctly but both the indicator light on the dash and the one on the engine remote start flicker a couple minutes after a cold start. Thanks.
jor

Title: Re: oil pressure sender
Post by: Racedad on December 01, 2019, 11:07:50 am

This will work. One post is variable resistance and one is ground switch.New Oil Pressure Transducer Sender 0-80 Psi Input 10-180Ohms Output Sensor |... (https://www.ebay.com%2Fulk%2Fitm%2F132334926697)

Title: Re: oil pressure sender
Post by: red tractor on December 01, 2019, 04:18:31 pm

Thank you Racedad

Foretravel Owners' Forum

Foretravel Motorhome Forums => Foretravel Tech Talk => Topic started by: red tractor on November 30, 2019, 05:09:32 pm