Well finally taking on another fiberglass project. Had cracks in the glass in the corners of the rear ac.
Just starting more later😋
Your getting good at FG fixin. I'll swing it n this summer I have some body work that needs done.
When making this type of repair do you work from both sides, top and bottom, or just from the top?
Iam only able to work from the outside, I open up the crack with a die grinder and when I lay the resin down I push it into the crack as well as the fiberglass mat .
Then I put three more layers on.
I got rained out so will post pictures when it clears up.
Andy, admire your efforts. You might want to stop drill the crack to prevent the stressors from opening it back up. I used to do that with my Hatteras way back when. Here's a link on what I mean. http://fiberglassblog.com/2009/04/29/stopping-a-crack/ Woody.
Thanks Woody, got it covered. Have used that on my last fix👍
So step two, will let it set up a little longer as weather turned off cool. And sand and finish