Ok. Got my new breakers from Brad at FT. Pulled the passenger stairwell panel off to view them. Found the bad one thanks to the Tech line and Ronny at FT and now need to change it. Looks like the breakers are captured by a copper buss bar feeding the entire row. I assume I need to remove it on all to replace one breaker? Turning master switch off enough to work on them?
Thanks
Depends on which bus. Try it and check with a DVM.
Rich
Re sourcing them, they are common breakers available at any auto parts store.
No. I would disconnect the batteries if you want to shut it all down.
jor