Is there a spray I can use to stick the black vinyl covering back onto the genny bay area that's not flammable? Not a lot falling down but would like to get it stopped before it gets worse
Thanks
It's probably at the end of its life. I've been pulling It out all over the coach. Dynamate or a cheaper clone. On the list
Amazon.com: Noico 80 mil 36 sqft car Sound deadening mat, Butyl Automotive... (https://www.amazon.com/Noico-deadening-Automotive-Insulation-dampening/dp/B00URUIKAK/ref=sr_1_2_sspa?crid=1RCY1QGHFRFI9&dchild=1&keywords=dynamat+sound+deadener&qid=1598314704&sprefix=Dynamat%2Caps%2C222&sr=8-2-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzRkxIVkJBRVRHNDdJJmVuY3J5cHRlZElkPUExMDIxMjc0M0hPNkpRMlFTUkhINyZlbmNyeXB0ZWRBZElkPUEwMjM1MDUwM0wxSFhNRzRWQlkwRyZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=)
Scott
Good point. Thanks. I'll get some
I would research what is the best bang for your buck. I've been told by several friends that the copy products work real good at half the price. , like I said it is on my list, I've been pulling out for now. I'm sure there are people here that can point you in a good direction. I'll probably follow your lead.
Scott
Until you replace the insulation, carefully watch the generator air filter. Once the black plastic starts failing, insulation can be sucked into the air filter.
Have used the Noico,good stuff,3M makes a spray glue that is heat resitant.
Powertech parts dept sells self adhesive replacement foam insulation. Of course not cheap.