Anyone have a current good source for Transynd oil. Amazon is $54.40
Amazon.com: Allison 27101-CTCS Genuine TranSynd Transmission Fluid: Garden &... (https://www.amazon.com/Allison-27101-CTCS-Genuine-TranSynd-Transmission/dp/B07DCG4L5F/ref=sr_1_3?crid=LBRY6YKPV7CP&dchild=1&keywords=transynd+allison+transmission+fluid&qid=1599751828&sprefix=Transynd%2Caps%2C249&sr=8-3)
Scott
I just had 6 gallons delivered yesterday.
Transynd Synthetic Transmission Fluid | DMAX Store (https://dmaxstore.com/products/?route=product/product&product_id=41&search=transynd)
Pacific power group 45$ gallon order shipping 8$ Total
27101 - 1-GALLON ALLISON TRANSYND ATF - Pacific Power Group (https://www.pacificpowergroup.com/product/27101-1-gallon-transynd-atf)
Locally Transynd is $66 a gallon. I used Mobil Delvac 1 which is Allison TES295/TES468 approved. Can get it from Summit Racing $32 gallon if you purchase the 4 pack. and free shipping. I needed 7 gallons.
I got the last TES 295 Allison fluid from A Mack dealer 195.00 5 gallons. Check around most heavy truck dealers stock it. BP Autran TES295 is one I have used, some decent deals on line, if you can get free shipping.
You can get the Amsoil fluid for around the same price $200 for 5 gallons,free shipping,pm me for more info.
I'll use them next time shipping is lower
I have the Amsoil equivalent in ours and very pleased with it.
Amsoil Torque Drive is the name. All fluids in our vehicles are Amsoil and I like the longer change times it gives
Johnh
Stewart and Stevenson (Allison dealer) in Corpus Christi 37.00 a gallon in singles. Two months ago. I've found the Allison dealers to have the best price on Transynd and filters. The two small square cut o rings I bought for 27.00 were a different matter though.
Someone mentioned, the "Sq O rings" outside the engine,, a sq o ring is a wonderful item if U like to change them often.
The problem is compression set, the only reason u need a O ring or similar is thermal expansion. The "static" parts move around for a variety of reasons.
A Sq cut, as we called it a Lathe , Cut is a ring whacked of from a extrusion, [rubber] before or after Curing. It's big problem it has not been compression molded, [think forged vs cast]. A compression molded O ring is the somewhat same, it is put into a mold, squeezed & Under temperature /pressure & often Vacuum. Until cured.
For us the basic benefit, that gives better compression set resistance.
Compression set is when U take it out, its flat on 2 sides [maybe 1] but still looks pretty good,
Not the scope to go further, my opinion a used O ring, with no visible defects exceeds the ability of a new SQ cut. Given both are the same "rubber". Rubber is a another story..
Regards,
Bill
One housing is rounded O ring socket and the other is flat sided and bottom O ring socket. Different years have one or the other.
Are these seals included in my filter kit I purchased. Or do I need to purchase separately?
The Allison kit 29558329 I purchased contained two filters, two flat gaskets, 4 o-rings for the filters and one o-ring for the drain plug. There were no extras for my application. My transmission is HD4060R and does not use the square cut sealrings.
This kit did not include the square cut filter cover sealrings. The instruction sheet includes a note stating the square cut sealrings must be obtained separately and were used in transmissions manufactured prior to January 22, 1996 prior to 3000 series S/N 6510069120 and 4000 series S/N 6610009730.
Dip stick placard
00SA3316EN - TRANSYND DIPSTICK LABEL - Pacific Power Group (https://www.pacificpowergroup.com/product/00sa3316en-transynd-dipstick-label)
Update shipping "free" can be requested. Ordered two stickers and 10 gal oil for $452 delivered to my house
Scott
The filter kit I just received has square and round O rings with instructions to use the same as what is removed and parts that may or may not be needed.
And a extra five percent off for you
Use code PACPOWER5OFF