Got 2 of OReily AGM 8D $884, out the door. Man, the lights are so much brighter now. On the Link 2000 interface there is a setting for either: Wet Liquid or Gelled Elecrolyte. Which setting would be used for AGM batteries?
Thanks, Mike
Wet is the closest to agm profile.
Ok, thanks.
Mike
Craneman's advice is accurate. That being said it is always prudent to monitor your battery voltage. The manufacturer of your battery's Technical Manual says never to exceed a a temperature compensated 14.6 volts at 68 F, and best set to 14.4 For your own research, the following is the East Penn Tech Manual.
http://www.eastpenn-deka.com/assets/base/0139.pdf