Since I'm replacing all my coolant I would like to change the 20 year old hoses. Would prefer rated silicone hoses but have been unable to locate part numbers
There is Gates available except for the P33614 doesn't show up when searched, does any one have a part number for it?
Thanks for helping
Scott
ISM11 - 450HP
Coolant Filter ------------------Fleetguard WF2077
Hoses:
Upper Radiator Hose
Ell Engine End--------------- 2 1/4" x 16" -P33614
Radiator End --------------------------------- P37548
------------------------------------------(Gates) 23562
Lower Radiator Hose
Radiator End --------------------------------- P37548
------------------------------------------(Gates) 23562
Engine End (water pump)------------------ P37548
------------------------------------------(Gates) 23562
Bypass Hose --------------------- 1" x 7' -P7000447
------------------------------------ (Gates) 4230-0150
Cooler Hose
In ---------------------------------------------- P37298
------------------------------------------(Gates) 21472
Out -------------------------------------------- P37267
------------------------------------------(Gates) 21400
Some of the hoses you will have to just measure to get the right size,would also get the better hose clamps that don't cut into the hose,forgot the correct name,try siliconehose.com.
Spent some time on that web sight from one of your prior posts wasn't able to locate by part number but will measure so as to be able to order if needed.
Scott
Constant tension clamps and Brad at FT has the one hose that is hard to find in stock. Let us know, I'm going to do this this spring
Gates company recommends using there power grip hose clamps. I've never seen these before and they are real interesting product, I'm sure they would work good, but I'll be passing on them. Really worth looking at the change of simple products.
Scott
Amazon.com: Gates Clamp: Automotive (https://www.amazon.com/Gates-32954-PowerGrip-Hose-Clamp/dp/B000CRHLB2/ref=pd_sbs_263_5/137-2002649-6947754?_encoding=UTF8&pd_rd_i=B000CRHLB2&pd_rd_r=d659ce7d-ecf1-40dd-b5b9-f1afe64e29ab&pd_rd_w=ap5Np&pd_rd_wg=SN4uh&pf_rd_p=ee4a13a5-1d19-4a45-a832-a74924eb9541&pf_rd_r=BNF4KZM9RM4DG6CQE65N&psc=1&refRID=BNF4KZM9RM4DG6CQE65N)
Second attemp
P33614
PUROSIL 80-225-M1
2 1/4 inch hose
I couldn't find the number on mine but didn't change it as it is silicon and they seldom fail.
Another option is have a a 2 1/4" stainless elbow made and just use straight 2 1/4 silicone hose for connecting.
These folks make first class elbows
BHTubes.com (https://bhtubes.com/)
They actually sell the silicon 2 1/4" elbow. Now I know where one can be found.
Ordered gates and converted to all Breeze spring clamps. Inspected upper silicone and decided to reuse
Scott
Your hoses are silicone and very rarely fail, even after 20 years.
Well actually my hoses must of been changed then prior to 2007. They have Gates green stripe on the radiator and water pump lower hose. Bulge hoses. The ones on the trans cooler are definitely not silicone. The one that I posted picture is definitely silicone. I looked for several hours for the other hoses by part number but never found in silicone. They surely will out last my life not being silicone and that is okay with me.
Scott