Text only | Text with Images

Foretravel Owners' Forum

Foretravel Motorhome Forums => Foretravel Tech Talk => Topic started by: leejrfla on November 15, 2020, 08:42:28 am

Title: Solenoid
Post by: leejrfla on November 15, 2020, 08:42:28 am
Hello every one.  I am replacing the aux start Solenoid and boost solenoid on the isolator board on my 93 GV u300 DD.  Can someone provide me a part number for them?  In appearance both look to be the same.

Thanks,
Woodie
Title: Re: Solenoid
Post by: Chuck & Jeannie on November 15, 2020, 08:50:11 am
The Cole Hersee 24213 has been used by many Forum members for these applications.  It meets the requirements, and is not too expensive.  Shop around (online) for the best price.

Amazon.com: Cole Hersee 24213 12V 200A Continuous Solenoid: Automotive (https://www.amazon.com/Cole-Hersee-24213-Continuous-Solenoid/dp/B005K2429I)

Title: Re: Solenoid
Post by: leejrfla on November 15, 2020, 09:32:54 am
Thank you
Title: Re: Solenoid
Post by: len.barron on November 15, 2020, 10:03:15 am
Quote from: Chuck & Jeannie –
The Cole Hersee 24213 has been used by many Forum members for these applications.  It meets the requirements, and is not too expensive.  Shop around (online) for the best price.

Amazon.com: Cole Hersee 24213 12V 200A Continuous Solenoid: Automotive (https://www.amazon.com/Cole-Hersee-24213-Continuous-Solenoid/dp/B005K2429I)


I just bought one of these to replace a cheap knock off that I have that drops about .5vdc when closed..
Title: Re: Solenoid
Post by: Pierce & Gaylie Stewart on November 15, 2020, 10:25:19 am
No correct order on the small wires. Just make sure one goes to ground.

Pierce
Title: Re: Solenoid
Post by: JohnFitz on November 15, 2020, 02:47:00 pm
When ordering the one for the Boost, you need to make sure it's rated for "continuous" use, as is the one in the link.
If not, it will get too hot and the coil will burn out.
Text only | Text with Images