I am looking for information on the rear air ride leveling Vale part number and how to Measure the air ride height the Measuring points and the MeasurementsI have a leaking valve and need too replace it
Coach on flat ground, at travel ride height:
There are two ride height valves on the rear suspension-- one on each side.
Measure at the air bags in front of the rear tires (toward center of coach). From above the 1/4" plate above the air bags to below the 1/4" plate below the air bags= 8 1/2"
Lengthening the rod to the ride height valve raises ride height.
. Thanks I under stand now just have to find a part number or take the old one of and go to a truck shop they may be the same as the air ride on a truck
90555105 by HALDEX - IR Height Control Valve - without Dump Valve (https://www.finditparts.com/products/363887/haldex-90555105)
90555105 - Height Control Valve - Replaces 90554241 - Haldex product (https://www.haldex.com/en/na/suspension-controls/height-control-valve/ir-height-control-valves/90555105/)
Ride Height Valve by Torque (https://www.foreforums.com/index.php?topic=34497.0)
Thank I bookmark it with all my notes
Not a good idea to mix immediate response with a standard flow ride height valve especially on the rear axle, KN27000 is standard flow. Immediate response valves work best for our coaches.
I removed reference to KN27000 from my earlier post.
Reminder...Buy 2 put one in coach bay for the road.
Are the front and rear valves the same?
Yes